MOTORS AND DRIVERS
Showing all 22 results
-
MOTORS AND DRIVERS, Vibration Motor
1.5-5V DC Vibration Motor with Wire
The vibration motor is designed to operate within a voltage range of 1.5 to 5 volts DC (direct current) and is commonly used for applications that require vibration, such as in mobile devices, wearables, controllers, and more.
SKU: PH156 -
-
-
BO MOTOR, MOTORS AND DRIVERS
200 RPM Dual Shaft BO Motor – Straight
Features of 200 RPM Dual Shaft BO Motor – Straight:-
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances are often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
SKU: n/a -
-
DC MOTOR, MOTORS AND DRIVERS
30RPM Johnson Geared Motor High Torque Motor
The Johnson Geared Motor gives very good torque at an affordable price hence they are widely applicable in Pan/Tilt camera, auto shutter, welding machines, water meter IC card, grill, oven, cleaning machine garbage disposers, household appliances, slot machines, money detector, automatic actuator, coffee machine, towel disposal, lighting coin refund devices, the peristaltic pump and so on.
SKU: PH181 -
DC MOTOR, GEARED MOTOR, MOTORS AND DRIVERS
500 RPM – 12V Centre Shaft DC Geared Motor
Specifications and Features:-
- RPM: 500.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
SKU: n/a -
MOTORS AND DRIVERS, STEPPER MOTOR, STEPPER MOTOR DRIVERS
A4988 driver Stepper Motor Driver- Normal Quality
MOTORS AND DRIVERS, STEPPER MOTOR, STEPPER MOTOR DRIVERSA4988 driver Stepper Motor Driver- Normal Quality
Features :
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
Current (No Hestsink) 1 A Current (With Hestsink) 2 A Logic Input (V) 3 ~ 5.5 SKU: n/a -
MOTOR DRIVER, MOTORS AND DRIVERS
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
MOTOR DRIVER, MOTORS AND DRIVERSCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Width (mm) 52 Height (mm) 18 Weight (gm) 30 SKU: n/a -
MOTORS AND DRIVERS, PUMP MOTORS
DC 3-6 V Mini Micro Submersible Water Pump
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
Features :
- DC 3v to 6v submersible pump
- micro mini submersible water pump 3v to 6v
- DC water pump for DIY
- DC pump for HOBBY kit.
Maximum Lift (mm) 40 to 110 Continuous Working Life (hours) 500 Driving Mode DC, Magnetic Driving Material Plastic Inner Diameter (ID) (mm) 5 Outer Diameter (OD)(mm) 7.5 SKU: n/a -
MOTOR DRIVER, MOTORS AND DRIVERS
L298N 2A Based Motor Driver Module
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
Driver Model L298N 2A Operating Voltage (VDC) 5 ~ 35 Peak Current (A) 2 Continuous Current (A) 0-36mA No. of Channels 2 Over-Current Protection (A) Yes Thermal Protection Yes LED Indicator Yes Cooling Fan No Arduino Sheild No- can be used with Wire connection Dimensions in mm (LxWxH) 44 x 44 x 28 Weight (gm) 25 Max power  25W. Shipping Weight 0.03 kg Shipping Dimensions 7 × 7 × 3 cm SKU: n/a -
MOTOR DRIVER, MOTORS AND DRIVERS
Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
-20%
MOTOR DRIVER, MOTORS AND DRIVERSMini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
- New L293D motor shield, the input voltage DC4.5-25V
- 600mA output current capability per channel
- 1.2A peak output current(non-repetitive) per channel
- Enable facility
- Overtemperature protection
- Logical “0” input voltage up to 1.5V(High noise immunity)
Model L293D Input Supply voltage (V) 4.5 ~ 25 Output Current (per channel) (mA) 600 Peak Output Current (per channel) (mA) 1.2 Switching Frequency (KHz) 5 No. of motors controlled by driver 2 Length (mm) 40 Width (mm) 35.5 Height (mm) 12.5 Weight (gm) 10 Shipping Weight 0.015 kg Shipping Dimensions 5 × 5 × 2 cm SKU: n/a -
GEARED MOTOR, N20 MOTORS
N20 6V 200 RPM Micro Metal Gear Motor
Features :
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motors output shaft.
Specifications:-
Model No. N20-6V-200 Operating Voltage (VDC) 3 ~ 6 No Load Current (mA) 0.04 A Stall Current (A) 0.67 Rated Torque(kg-cm) 0.4 Stall Torque(Kg-Cm) 1.2 Motor Body Size (Diameter) (mm) 12 Rated Operating Voltage (VDC) 6 No load Speed (RPM) 200 Rated Speed (RPM) 200 Shaft Type D-type
Single SideShaft Diameter (mm) 3 Weight (gm) 12 Output Axial Length (mm) 10 Fuselage w/o Shaft Length 26 Screw Size M3 SKU: n/a -
-
-
MOTORS AND DRIVERS, SERVO MOTOR
Tower Pro MG90S Metal Gear Servo Motor (180 Degree Rotation)
Specification :-
- Modulation: Analog
- Torque:
– 4.8V: 2.20 kg-cm
– 6.0V: 2.50 kg-cm- Speed: 4.8V: 0.11 sec/60°
- 6.0V: 0.10 sec/60°
- Weight: 0.49 oz (14.0 g)
- Dimensions: Length:0.91 in (23.1 mm)
- Width: 0.48 in (12.2 mm)
- Height: 1.14 in (29.0 mm)
- Gear Type: Metal
- Rotation/Support: Dual Bearings
- Rotational Range: 180°
- Pulse Cycle: 20 ms
- Pulse Width: 400-2400 µs
SKU: n/a -
MOTORS AND DRIVERS, SERVO MOTOR
TowerPro SG90 Mini Servo – 180 degree Rotation – Standard Quality
Features :
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
Model SG90 Weight(gm) 9 Operating Voltage (VDC) 3.0 ~ 7.2 Operating Speed @4.8V 0.10sec/60° Stall Torque @ 4.8V (Kg-Cm) 1.2 Stall Torque @6.6V (Kg-Cm) 1.6 Operating Temperature (°C) -30 to 60 Dead Band Width ( μs) 7 Gear Type Glass Fiber Rotational Degree 180º Servo Plug JR Cable Length (cm) 25 Length (mm) 22.8 Width (mm) 12.6 Height (mm) 34.5 SKU: n/a
