Recommended Products
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone

30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
Raspberry Pi 4 Model-B with 8 GB RAM
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA

F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
Shop
Showing 25–48 of 206 results
-
-
SENSOR AND MODULES
3.3V Adapter Board for 24L01 Wireless Module
Features:
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator:
- Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
-
Output Voltage 1.9~3.6 DC Operating Current 12 mA Dimension (LxWxH) mm 26 x 19 x 12 Weight 3g
SKU: n/a -
CURRENT AND VOLTAGE SENSORS, SENSOR AND MODULES
30A range Current Sensor Module ACS712
Features :
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- 5.0 V, single supply operation
- 66 to 185 mV/A output sensitivity
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
- Extremely stable output offset voltage
- Nearly zero magnetic hysteresis
- The ratiometric output from the supply voltage.
Sensitivity 100mV/A Length (mm) 27 Width (mm) 12 Height (mm) 13.5 Weight (gm) 5 SKU: n/a -
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
-5%INTERFASE CABLES, WIRES AND CABEL30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
- Phone body interface: Micro USB
- Function: Connect to DJI Spark remote control and Micro USB port Smartphones or tablet
- Material: Nylon cable and PVC with high flexibility and stability.
- Cable Length: about 30cm;
- Weight: 9.1g.
- Perfect length for the remote controller with your devices.
SKU: n/a -
DC MOTOR, MOTORS AND DRIVERS
30RPM Johnson Geared Motor High Torque Motor
The Johnson Geared Motor gives very good torque at an affordable price hence they are widely applicable in Pan/Tilt camera, auto shutter, welding machines, water meter IC card, grill, oven, cleaning machine garbage disposers, household appliances, slot machines, money detector, automatic actuator, coffee machine, towel disposal, lighting coin refund devices, the peristaltic pump and so on.
SKU: PH181 -
-
LOAD, PRESSURE, FLOW & VIBRATION, SENSOR AND MODULES
40x40mm Thin Film FSR Pressure Sensor Force Sensitive Resistor Short tail 10G-20KG
-8%LOAD, PRESSURE, FLOW & VIBRATION, SENSOR AND MODULES40x40mm Thin Film FSR Pressure Sensor Force Sensitive Resistor Short tail 10G-20KG
A 40x40mm Thin Film FSR (Force Sensitive Resistor) Pressure Sensor with a Short Tail and a pressure range of 10 grams to 20 kilograms is a specialized electronic component used for detecting and measuring applied force or pressure.
SKU: PH142 -
SENSOR AND MODULES
433Mhz RSI Wireless Transmitter Receiver Module
Features :
- Low Power Consumption.
- Easy For RF-based Application.
- Complete Radio Transmitter.
- Transmit Range Up To 50m.
- CMOS / TTL Input.
- No Adjustable Components.
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
- ASK Modulation
Range in Open Space(m) 30 Transmitter Frequency Range(MHz) 433.92 Receiver Frequency Range(MHz) 433 Sensitivity 105 dBm Receiver Supply Current(mA) 3.5 RX IF Frequency(MHz) 1 Receiver Operating Voltage(V) 5 Transmitter Supply Voltage(V) 3 to 6 Transmitter Output Power(dBm) 4 to 12 TX Module Size(mm) 13x12x4 (LxWxH) RX Module Size(mm) 13x45x4 (LxWxH) Weight(gm) 6 SKU: n/a -
DC MOTOR, GEARED MOTOR, MOTORS AND DRIVERS
500 RPM – 12V Centre Shaft DC Geared Motor
Specifications and Features:-
- RPM: 500.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 1 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
SKU: n/a -
WHEEL
65mm Robot Wheel for BO Motors (Yellow)
- Tire with sponge liner for more strength
- With upgraded tire tread for greater friction
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre: Rubber
- Color: Yellow
SKU: n/a -
MOTORS AND DRIVERS, STEPPER MOTOR, STEPPER MOTOR DRIVERS
A4988 driver Stepper Motor Driver- Normal Quality
MOTORS AND DRIVERS, STEPPER MOTOR, STEPPER MOTOR DRIVERSA4988 driver Stepper Motor Driver- Normal Quality
Features :
- Automatic current decay mode detection/choice.
- Mixed with slow current decay mode.
- The low power dissipation of synchronous rectifier.
- Internal UVLO(ultra voltage lockout).
- Crossover current protection.
- Thermal shutdown circuit.
- Ground fault protection.
- Loading and short circuit protection.
- The optional five-step mode: full, 1/2, 1/4, 1/8 and 1/16.
Current (No Hestsink) 1 A Current (With Hestsink) 2 A Logic Input (V) 3 ~ 5.5 SKU: n/a -
ACCELEROMETER & GYROSCOPE, SENSOR AND MODULES
ADXL335 Module 3-axis Analog Output Accelerometer
Features :
- Onboard LDO Voltage regulator
- Can be interfaced with a 3V3 or 5V Microcontroller.
- All necessary Components are populated.
- Ultra-Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
Operating Temperature (°C) -40 to 90 Length (mm) 21 Width (mm) 16 Height (mm) 2.5 Weight (gm) 0.6 - Analog output
- Build-in ultra-low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
- Designed for 5V logic level
SKU: n/a -
ACCELEROMETER & GYROSCOPE, SENSOR AND MODULES
ADXL345 Tripple Axis Accelerometer Board
Features :
- Ultra-Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
- Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command
- Wide temperature range (−40°C to +85°C).
- 10,000 g shock survival.
- Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop faster than 1117, the faster load speed of response, very suitable for high-noise power supply environment.
- User-selectable resolution
- Fixed 10-bit resolution.
- Full resolution, where resolution increases with G range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all G ranges).
-
Input Supply Voltage (VDC) 3.3 ~ 5 Interface Type I²C, SPI Sensing Range ±2g, ±4g, ±8g, ±16g X-Axis Sensitivity 28.6 LSB/g Y-Axis Sensitivity 31.2 LSB/g Z-Axis Sensitivity 34.5 LSB/g Length (mm) 20.5 Width (mm) 15.5 Height (mm) 3.5 Weight (gm) 0.6
SKU: n/a -
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASED
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
-10%ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASEDAlcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
“Alcohol Detection Vehicle System prevents drunk driving with real-time alcohol sensing, location tracking, motor lock, and SMS alerts for enhanced road safety and control.”
SKU: EHAP049 -
HARDWARE AND TOOLS, Other Tools, SOLDERING TOOLS, WORKING MODELS AND CRAFT
All Purpose Hot Melt Glue Sticks for Glue Gun – 5pcs
-13%HARDWARE AND TOOLS, Other Tools, SOLDERING TOOLS, WORKING MODELS AND CRAFTAll Purpose Hot Melt Glue Sticks for Glue Gun – 5pcs
This is All Purpose Hot Melt Glue Sticks for Glue Gun – 5pcs Glue Sticks can be used for various everyday gluing projects, also used in electronics projects for various applications.
SKU: PH188