-
×
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio Rated 4.50 out of 5 based on 2customer ratings (2 customer reviews)
1 × ₹75.00
Subtotal: ₹75.00
SENSOR AND MODULES
Showing 25–48 of 48 results
-
CHARACTER LCD, DEVELOPMENT BOARD, DISPLAY AND LCD, OLED DISPLAY, SENSOR AND MODULES
I2C Module for 16×2 (1602) Character LCD
CHARACTER LCD, DEVELOPMENT BOARD, DISPLAY AND LCD, OLED DISPLAY, SENSOR AND MODULESI2C Module for 16×2 (1602) Character LCD
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: n/a -
-
ACCELEROMETER & GYROSCOPE, SENSOR AND MODULES
MPU-6050 3-Axis Accelerometer and Gyro Sensor
Features :
- Chip built-in 16bit AD converter, 16-bit data output.
- I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format.
- Selectable Solder Jumpers on CLK, FSYNC, and AD0.
- Digital Motion Processingâ„¢ (DMPâ„¢) engine offloads complex MotionFusion, sensor timing synchronization, and gesture detection.
- Embedded algorithms for run-time bias and compass calibration. No user intervention is required.
- Digital-output temperature sensor.
Driver IC MPU-6050 Operating Voltage (VDC) 3 ~ 5 Communication I2C Protocol Gyro range(°/s) ± 250, 500, 1000, 2000 Acceleration range(g) ± 2 ± 4 ± 8 ± 16 Length (mm) 20 Width (mm) 16 SKU: n/a -
GAS SENSORS, SENSOR AND MODULES
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
The MQ-135 Air Quality/Gas Detector Sensor Module is a widely used sensor module designed to detect a range of air pollutants and gases.
- Model: MQ-135
- Operating Voltage (VDC): 5
- Detecting Range: 100ppm to 1000ppm
SKU: PH205 -
GAS SENSORS, SENSOR AND MODULES
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
The MQ 2 Smoke Detection Sensor/MQ2 Gas Sensor is a popular gas detection module used in various electronics projects and applications.
- Operating Voltage (VDC): 5
- Analog Output Voltage: 0V to 5V
- Digital Output Voltage : 0V or 5V (TTL Logic)
SKU: PH207 -
GAS SENSORS, SENSOR AND MODULES
MQ-3 Alcohol Detector Gas Sensor Module
The MQ-3 Alcohol Detector Gas Sensor Module is a widely used sensor in various applications for detecting alcohol vapors.
- Operating Voltage (VDC): 5V ±0.1
- Current Consumption: 150mA
- Operation Temperature : -10°C ~ +70°C
- Concentration : 0.05 mg/L ~ 10 mg/L Alcohol
- Load resistance: 200 kΩ
SKU: PH212 -
GAS SENSORS, SENSOR AND MODULES
MQ-4 High Sensitive to Methane and Natural Gas
The MQ-4 High Sensitivity Gas Sensor Module is widely used to detect various gases, particularly methane (CH4) and natural gas.
- Model: MQ-4
- IC Chip: LM393
- Operating Voltage (VDC) : 3 ~ 5
- Detecting Range: 300ppm to 10000ppm
SKU: PH211 -
GAS SENSORS, SENSOR AND MODULES
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
The MQ-5 Methane LPG Liquid Propane Gas Sensor Module is a widely used sensor for detecting methane and LPG (liquefied petroleum gas) vapors.
- Model: MQ-5
- Operating Voltage (VDC): 5
- Operating Temperature (°C): -20 to 40
SKU: PH208 -
GAS SENSORS, SENSOR AND MODULES
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
The MQ6 Gas Sensor is a type of gas detection device that is designed to detect specific gases in the air, particularly Liquefied Petroleum Gas (LPG), Isobutane, and Propane. These gases are commonly used in household appliances like stoves, heaters, and gas-powered vehicles. The MQ-6 sensor module is part of the MQ series of gas sensors produced by the company Winsen, and it operates based on the principle of chemical resistance change.
SKU: PH213 -
GAS SENSORS, SENSOR AND MODULES
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
The MQ-7 CO Carbon Monoxide Coal Gas Sensor Module is a widely used sensor for detecting carbon monoxide (CO) gas, particularly in environments where this toxic gas might be present.
- Model: MQ-7
- Operating voltage (v): DC 5
- Range: 10 ~ 1000 ppm
SKU: PH210 -
GAS SENSORS, SENSOR AND MODULES
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
The MQ-8 Hydrogen Gas Sensor Module is a device designed to detect the presence of hydrogen gas in the environment.
- Model: MQ-8
- Operating Voltage (VDC): 5
- Current Consumption(mA) : 150
- Do output: TTL digital 0 and 1 ( 0.1 and 5V)
- Ao output: 0.1-0 .3 V (Relative to Pollution )
SKU: PH206 -
GAS SENSORS, SENSOR AND MODULES
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
The MQ-9 Carbon Monoxide, Methane, and LPG Gas Sensor Module is a versatile sensor designed to detect the presence of carbon monoxide (CO), methane (CH4), and liquefied petroleum gas (LPG).
- Model: MQ-9
- Current Consumption (mA): 150
- Operating Voltage (VDC): 5
- Do output: TTL digital 0 and 1 (0.1 and 5V)
- Ao output: 0.1-0.3V (relatively clean)
SKU: PH209 -
GSM and GPS Modules, SENSOR AND MODULES
NEO-6M GPS Module with EPROM
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
Model Ublox NEO-6M Receiver Type 50 Channels, GPS L1 frequency, C/A Code, SBAS: WAAS, EGNOS, MSAS Input Supply Voltage (VDC) 2.7 ~ 6 Main Chip NEO-6 Sensitivity (dBm) -160, 156, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm Navigation Update Rate 5Hz Position Accuracy (Meter) 2 Operating Temperature Range (°C) -24 to 84 Tracking Sensitivity (dBm) -161 dBm Avg Cold Start Time (s) 27 Warm Start Time (s) 27 Maximum Speed 500 M/s Dimensions (mm) LxWxH Antenna – 25 x 25 x 7, GPS Board – 22 x 30 x 4 Weight (gm) 12 Cable Length (cm) 10 Shipping Weight 0.016 kg Shipping Dimensions 8 × 6 × 4 cm SKU: PH010 -
SENSOR AND MODULES
PIR Motion Sensor Detector Module HC-SR501 (Copy)
- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain:Â <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
-  Work temperature: -20-+80°C
-
Model PIR HC-SR501 Operating Voltage (VDC) 4.5 ~ 20 Average Current Consumption (mA) 0.06 Distance Measuring Range (CM) 300 ~ 700 Output Type (High/ Low-level Signal) 3.3V TTL output Dimensions (mm) LxWxH 32 x 24 x 18 Weight (gm) 10 Working Temperature Range (°C) -20 to 80 Detection Angle <140° Delay Time 5 to 200s (Can be Adjusted, Default 5s +/- 3%) Shipping Weight 0.015 kg Shipping Dimensions 4 × 3 × 1 cm
SKU: n/a -
MISCELLANEOUS SENSORS, SENSOR AND MODULES
PS2 Joystick Module
- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
SKU: PH100 -
-
SENSOR AND MODULES
raindrops detection sensor module
Technical Details of Rain drop Sensor Module
- High-quality double-sided FR-04 material
- The comparator output signal is clean. And can source up to 15mA
- Adjustable Sensitivity for DO
- Working voltage 3.3V-5V
- Has a fixed bolt hole, convenient installation
- The output format: “DO” Digital switching outputs ( 0 and 1 ) and Analog voltage output “AO”
- Fixed bolt holes for easy installation
Physical Attributes
- Panel PCB Dimension: Approx.3cm x 1.5cm.
- Soil Probe Dimension: Approx. 5cm x 4cm.
- Cable Length: Approx.21cm.
- Weight (gm): 11
SKU: n/a -
GSM and GPS Modules, SENSOR AND MODULES
SIM900A GSM Modem With SMA Antenna (GSM Module)
The SIM900A GSM modem is a communication device that allows you to establish a GSM (Global System for Mobile Communications) connection to send and receive data, including text messages and calls, over the cellular network.
SKU: PH139 -
SENSOR AND MODULES
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio Rated 4.50 out of 5 based on 2customer ratings (2 customer reviews)
SENSOR AND MODULESSoil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer for Ardunio Rated 4.50 out of 5 based on 2customer ratings (2 customer reviews)
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
- Operating Voltage: 3.3V~5V
Soil Probe Dimension Approx. 6cm x 3cm Cable Length (cm) 20 Shipping Weight 0.02 kg Shipping Dimensions 8 × 6 × 3 cm SKU: n/a -
LIGHT, COLOR, VOICE AND SOUND, SENSOR AND MODULES
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
-34%
LIGHT, COLOR, VOICE AND SOUND, SENSOR AND MODULESSound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
- Main chip: LM393, Electret condenser microphone
- Working voltage:Â DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
SKU: PH107 -
SENSOR AND MODULES, TOUCH SENSORS
Super Debug MAX30100 Pulse Heart Rate Sensor Module
- ptical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- high-performance analog front
- Ultra low power operation increases battery life for wearable devices
SKU: PH108 -
DISTANCE AND VISION, MISCELLANEOUS SENSORS, SENSOR AND MODULES
Ultra-Sonic stand (No Screws)
The Cartoon Ultrasonic Sensor Mounting Bracket For HC-SR04 is a fun and easy way to mount your ultrasonic sensor.
- Thickness (mm): 2.8-3
- Material: Acrylic
- Inner Diameter (ID) (mm): 16
- Mounting Hole(mm) : 3.4
- Color: Blue
SKU: PH138 -
