Special Offer
Water Level Indicator with 3-Level Display on 7-Segment Screen
₹899.00-
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%
DRONE, FRAMES AND ACCESSORIESF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: PH148 -
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi 4 Model-B with 8 GB RAM
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port
- Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
SKU: n/a -
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
-5%
INTERFASE CABLES, WIRES AND CABEL30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
- Phone body interface: Micro USB
- Function: Connect to DJI Spark remote control and Micro USB port Smartphones or tablet
- Material: Nylon cable and PVC with high flexibility and stability.
- Cable Length: about 30cm;
- Weight: 9.1g.
- Perfect length for the remote controller with your devices.
SKU: n/a
-
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%DRONE, FRAMES AND ACCESSORIESF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: PH148 -
SENSOR AND MODULES, TEMPERATURE AND HUMIDITY SENSORS
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
-8%
SENSOR AND MODULES, TEMPERATURE AND HUMIDITY SENSORSDS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: n/a -
-
-
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi Pico (Latest & original)
Model : Raspberry Pi PICO
Operating Voltage (VDC) : 1.8 ~ 5.5
Processor : RP2040 (Dual-core Arm Cortex M0+) By Raspberry Pi
Interface : 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channels
RAM : 264 KB
GPIO : 26 Pins
Clock Speed : 133 MHz
On Board Ports : Micro-USB 5V/2.5A DC Power Input Port
Operating Temperature (°C) :-20 to 85SKU: PH032 -
ARDUINO BOARDS
arduino Nano Board R3 With CH340 Chip With Micro USB Cable
Technical Details
- Microcontroller: ATmega328
- Operating Voltage (VDC): 5
- Input Voltage (V): 7 to 12
- Digital I/O Pins: 14
- Analog I/O Pins: 8
- DC Current per I/O Pin (mA): 40
- Flash Memory: 32 KB
- SRAM: 2
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Physical Attributes
- PCB Size ( Length × Width ) mm: 43 x 18
- Weight (gm): 6
Additional Details
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- It Supports power supply by a 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX), and orange (L) LED.
- +5V to AREF jumper.
- Auto-sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a
-
ARDUINO BOARDS, DEVELOPMENT BOARD
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
- 802.11 b/g/n Standards
- Wi-Fi Direct (P2P), soft-AP
- 1MB Flash Memory
- Integrated low power 32-bit CPU could be used as an application processor
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
SKU: n/a -
-
MINI PROJECT, PROJECTS AND KIT, SENSOR BASED
Guardian Alert: Fire Alarm System with LM358 Precision
-13%
MINI PROJECT, PROJECTS AND KIT, SENSOR BASEDGuardian Alert: Fire Alarm System with LM358 Precision
Introducing our state-of-the-art Fire Alarm System, meticulously crafted with the precision of the LM358 IC. Designed to safeguard your space, this advanced alarm system detects the earliest signs of fire, ensuring a swift and reliable response.
SKU: EHEE010 -
-
-
GAS SENSORS, SENSOR AND MODULES
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
The MQ-8 Hydrogen Gas Sensor Module is a device designed to detect the presence of hydrogen gas in the environment.
- Model: MQ-8
- Operating Voltage (VDC): 5
- Current Consumption(mA) : 150
- Do output: TTL digital 0 and 1 ( 0.1 and 5V)
- Ao output: 0.1-0 .3 V (Relative to Pollution )
SKU: PH206 -
MOTOR DRIVER, MOTORS AND DRIVERS
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
MOTOR DRIVER, MOTORS AND DRIVERSCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Width (mm) 52 Height (mm) 18 Weight (gm) 30 SKU: n/a -
GSM and GPS Modules, SENSOR AND MODULES
NEO-6M GPS Module with EPROM
- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
Model Ublox NEO-6M Receiver Type 50 Channels, GPS L1 frequency, C/A Code, SBAS: WAAS, EGNOS, MSAS Input Supply Voltage (VDC) 2.7 ~ 6 Main Chip NEO-6 Sensitivity (dBm) -160, 156, Cold Start (without aiding): -147 dBm, Tracking & Navigation: -161 dBm Navigation Update Rate 5Hz Position Accuracy (Meter) 2 Operating Temperature Range (°C) -24 to 84 Tracking Sensitivity (dBm) -161 dBm Avg Cold Start Time (s) 27 Warm Start Time (s) 27 Maximum Speed 500 M/s Dimensions (mm) LxWxH Antenna – 25 x 25 x 7, GPS Board – 22 x 30 x 4 Weight (gm) 12 Cable Length (cm) 10 Shipping Weight 0.016 kg Shipping Dimensions 8 × 6 × 4 cm SKU: PH010
Products Grid
-
-
PROJECTS AND KIT, ROBITCS PROJECT
Wired control Tank With Robotic Arm || Robotics Project
This college-level project combines a tracked tank chassis with a robotic arm, all controlled via a wired interface. It’s designed for students to learn about robotics, control systems, and mechanical design.
SKU: EHRB007 -
-
-
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASED
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
-10%
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASEDAlcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
“Alcohol Detection Vehicle System prevents drunk driving with real-time alcohol sensing, location tracking, motor lock, and SMS alerts for enhanced road safety and control.”
SKU: EHAP049
Best Sellers
Recently Added
Wired control Tank With Robotic Arm || Robotics Project
This college-level project combines a tracked tank chassis with a robotic arm, all controlled via a wired interface. It’s designed for students to learn about robotics, control systems, and mechanical design.
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
“Alcohol Detection Vehicle System prevents drunk driving with real-time alcohol sensing, location tracking, motor lock, and SMS alerts for enhanced road safety and control.”
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
The MQ6 Gas Sensor is a type of gas detection device that is designed to detect specific gases in the air, particularly Liquefied Petroleum Gas (LPG), Isobutane, and Propane. These gases are commonly used in household appliances like stoves, heaters, and gas-powered vehicles. The MQ-6 sensor module is part of the MQ series of gas sensors produced by the company Winsen, and it operates based on the principle of chemical resistance change.
MQ-3 Alcohol Detector Gas Sensor Module
The MQ-3 Alcohol Detector Gas Sensor Module is a widely used sensor in various applications for detecting alcohol vapors.
MQ-4 High Sensitive to Methane and Natural Gas
The MQ-4 High Sensitivity Gas Sensor Module is widely used to detect various gases, particularly methane (CH4) and natural gas.
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
The MQ-7 CO Carbon Monoxide Coal Gas Sensor Module is a widely used sensor for detecting carbon monoxide (CO) gas, particularly in environments where this toxic gas might be present.
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
The MQ-9 Carbon Monoxide, Methane, and LPG Gas Sensor Module is a versatile sensor designed to detect the presence of carbon monoxide (CO), methane (CH4), and liquefied petroleum gas (LPG).
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
The MQ-5 Methane LPG Liquid Propane Gas Sensor Module is a widely used sensor for detecting methane and LPG (liquefied petroleum gas) vapors.
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
The MQ 2 Smoke Detection Sensor/MQ2 Gas Sensor is a popular gas detection module used in various electronics projects and applications.
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
The MQ-8 Hydrogen Gas Sensor Module is a device designed to detect the presence of hydrogen gas in the environment.
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
The MQ-135 Air Quality/Gas Detector Sensor Module is a widely used sensor module designed to detect a range of air pollutants and gases.
Automatic Irrigation System with Soil Moisture Sensor and LCD Display || Arduino Based Project
Automatic Irrigation System with Soil Moisture Sensor and LCD Display || Arduino Based Project
Discover an efficient plant watering solution with our Automatic Irrigation System using Arduino Uno. Monitor soil moisture and control water pump motor for optimal plant growth. Real-time feedback on 16×2 LCD.