Recommended Products
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
-5%
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
Phone body interface: Micro USB
Function: Connect to DJI Spark remote control and Micro USB port Smartphones or tablet
Material: Nylon cable and PVC with high flexibility and stability.
Cable Length: about 30cm;
Weight: 9.1g.
Perfect length for the remote controller with your devices.
SKU: n/a
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi 4 Model-B with 8 GB RAM
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
SKU: n/a
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Moter Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
SKU: PH148
Shop
Showing 49–72 of 214 results
-
ARDUINO BOARDS, DEVELOPMENT BOARD
Arduino Mega 2560 Board Without USB Cable
The Arduino Mega 2560 is a microcontroller board based on the Atmega 2560 Microcontroller. It is one of the most powerful and feature-rich boards in the Arduino family and is commonly used for projects that require more I/O pins, memory, and processing capabilities than the standard Arduino Uno.
SKU: PH174 -
ARDUINO BOARDS
arduino Nano Board R3 With CH340 Chip With Micro USB Cable
Technical Details
- Microcontroller: ATmega328
- Operating Voltage (VDC): 5
- Input Voltage (V): 7 to 12
- Digital I/O Pins: 14
- Analog I/O Pins: 8
- DC Current per I/O Pin (mA): 40
- Flash Memory: 32 KB
- SRAM: 2
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Physical Attributes
- PCB Size ( Length × Width ) mm: 43 x 18
- Weight (gm): 6
Additional Details
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- It Supports power supply by a 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX), and orange (L) LED.
- +5V to AREF jumper.
- Auto-sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
ARDUINO BOARDS, DEVELOPMENT BOARD
Arduino Uno R3 DIP with Cable
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable), 54 (with cable) Shipping Weight 0.08 kg Shipping Dimensions 9 × 6 × 4 cm SKU: n/a -
ARDUINO, MINI PROJECT, PROJECTS AND KIT, SENSOR BASED
Arduino-Based Alcohol Detector with MQ3 Sensor and 16×2 LCD
-30%
ARDUINO, MINI PROJECT, PROJECTS AND KIT, SENSOR BASEDArduino-Based Alcohol Detector with MQ3 Sensor and 16×2 LCD
With its precision, reliability, and user-friendly interface, the Arduino-Based Alcohol Detector with MQ3 Sensor and 16×2 LCD serves as an effective tool for alcohol level monitoring in various applications, promoting safety and awareness.
SKU: EHEE006 -
ELECTRICAL PROJECTS, PROJECTS AND KIT
Arduino-Powered Automatic Load Sharing || Electrical Major Project
-13%
ELECTRICAL PROJECTS, PROJECTS AND KITArduino-Powered Automatic Load Sharing || Electrical Major Project
Automate load sharing in electrical systems using Arduino for efficiency, reliability, and balanced distribution across multiple sources with real-time monitoring and customizable features.
SKU: EHAP041 -
ARDUINO, MINI PROJECT, PROJECTS AND KIT, SENSOR BASED
Automated Curtain Control Systema with Rain Sensor
-17%
ARDUINO, MINI PROJECT, PROJECTS AND KIT, SENSOR BASEDAutomated Curtain Control Systema with Rain Sensor
Transform your home with an automated curtain controller using a rain sensor. This DIY project opens and closes the curtain automatically when it starts and stops raining, providing convenience and weather protection. Learn how to create your own smart home solution with Arduino.
SKU: EHEE020 -
ARDUINO, PROJECTS AND KIT, SENSOR BASED
Automatic Irrigation System with Soil Moisture Sensor and LCD Display || Arduino Based Project
-17%
ARDUINO, PROJECTS AND KIT, SENSOR BASEDAutomatic Irrigation System with Soil Moisture Sensor and LCD Display || Arduino Based Project
Discover an efficient plant watering solution with our Automatic Irrigation System using Arduino Uno. Monitor soil moisture and control water pump motor for optimal plant growth. Real-time feedback on 16×2 LCD.
SKU: EHAP048 -
-
-
ELECTRICAL PROJECTS, PROJECTS AND KIT
Bi-Directional DC Motor Speed Controller Project Using Arduino
-10%
ELECTRICAL PROJECTS, PROJECTS AND KITBi-Directional DC Motor Speed Controller Project Using Arduino
This project is about creating a DC Motor Speed Controller using Arduino, you will see how to control the speed and direction of a DC motor using an Arduino, potentiometer, push buttons, and an L298N motor driver.
SKU: n/a -
WHEEL
BO Wheel 7cm Dia. x 1cm Width – 4pcs
- Shaft Diameter : 6 mm.
- Wheel Diameter : 70 mm.
- Wheel Width : 7.5 mm.
- Loading Capacity : 2 kg.
- Color : Red/Yellow.
Color Red, Yellow Loading Capacity (Kg) 2 Weight (gm) 60 Wheel Diameter(mm) 70 Wheel Width (mm) 12 Body Material Plastic Grip Material Rubber Shaft Diameter (mm) 6×4 Shaft Type Double D-Type SKU: n/a -
-
INTERFASE CABLES, WIRES AND CABEL
Cable For Arduino UNO/MEGA (USB A to B) 50cm
A cable for Arduino UNO/MEGA with a USB A to B connector is a specific type of USB cable designed for connecting an Arduino board (such as the Arduino UNO or Arduino MEGA) to a computer or other host device for programming, power, and data communication.
SKU: PH175 -
-
MOTOR DRIVER, MOTORS AND DRIVERS
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
MOTOR DRIVER, MOTORS AND DRIVERSCNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
Features :
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Width (mm) 52 Height (mm) 18 Weight (gm) 30 SKU: n/a -
MINI PROJECT, PROJECTS AND KIT, SENSOR BASED
Cool Breeze Precision: Temperature Control Fan with LM358 IC
-8%
MINI PROJECT, PROJECTS AND KIT, SENSOR BASEDCool Breeze Precision: Temperature Control Fan with LM358 IC
Experience optimal comfort with our Temperature Control Fan, enhanced by the reliable LM358 IC. This smart fan system intelligently adjusts its speed based on the ambient temperature, ensuring a refreshing breeze at all times.
SKU: EHEE016 -
Uncategorized
CP2102 USB 2.0 to TTL UART Serial convertor Module
Brand/Manufacturer Generic Country Of Origin China Packer / Importer Address Constflick Technologies Limited, Building No 13 and 14, 3rd Floor, 2nd Main, Siddaiah Road, Bangalore, Karnataka – 560027 India. MRP Rs. 171.1 (Inclusive of all Taxes) SKU: n/a -
Uncategorized
DC 12V Cabinet Door Lock Electric Lock Assembly Solenoid
- Holding force: 0.25 kg
- Energized forms: intermittent
- Unlocking time: 1s
- Dimensions: 54 x 42 x 28 mm (LxWxH)
- High quality ultra-compact electric lock.
Features:
- Iron Body Material
- High quality ultra-compact electric lock.
- Rustproof, durable, safe, convenient to use.
- Suction tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Adopts the principle of electric magnetism, when the current through the silicon, the electromagnetic lock will achieve a strong.
Model DC 12V Cabinet Door Lock Rated Operating Voltage (VDC) 12 Rated Current (mA) 0.80A. Power Consumption (Watt) 9.6 Holding Force (N) 2.45 Unlocking Time 1 sec Body Material Iron Metal Energized forms Intermittent Cable Length (cm) 25 Weight (gm) 150 Dimensions (mm) LxWxH 54 x 42 x 28 SKU: n/a
