Recommended Products
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
-5%
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
Phone body interface: Micro USB
Function: Connect to DJI Spark remote control and Micro USB port Smartphones or tablet
Material: Nylon cable and PVC with high flexibility and stability.
Cable Length: about 30cm;
Weight: 9.1g.
Perfect length for the remote controller with your devices.
SKU: n/a
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi 4 Model-B with 8 GB RAM
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
Operating Power 5V@3A via USB Type-C port
Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
SKU: n/a
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
Wheelbase: 450mm
Material: Glass Fiber + Polyamide-Nylon
Moter Mounting Hole Diameter: 3 mm
Arm Size: 220 x 40 (LxW) mm
Arm mounting holes (on frame): 3 mm
Arm mounting holes (on arm): 2 mm
SKU: PH148
Shop
Showing 1–24 of 210 results
-
DISPLAY AND LCD, OLED DISPLAY
0.96 Inch I2C/IIC 4-Pin OLED Display Module -WHITE
- Size: 0.96 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Display Area: 21.74 x 10.86mm
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
- Light Color: White
Display Area 21.74 x 10.86mm Driving Voltage 3.3-5V Operating Temperature -40º~70º Celsius Interface Type IIC Pixel Color White Length (mm) 27 Width (mm) 27 Height (mm) 6 Weight (gm) 5 Shipping Weight 0.01 kg Shipping Dimensions 5 × 8 × 1 cm SKU: n/a -
MOTORS AND DRIVERS, Vibration Motor
1.5-5V DC Vibration Motor with Wire
The vibration motor is designed to operate within a voltage range of 1.5 to 5 volts DC (direct current) and is commonly used for applications that require vibration, such as in mobile devices, wearables, controllers, and more.
SKU: PH156 -
-
-
-
-
Uncategorized
125KHz RFID Card – 5Pcs.
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry)
- Operating frequency: 125KHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Anticollision
SKU: PH079 -
-
-
ARDUINO BOARDS, RASBERRY PI
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
ARDUINO BOARDS, RASBERRY PI16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
Features :
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
- 3 pin connectors in groups of 4 so you can plug in 16 servos at once
- Chainable design
- A spot to place a big capacitor on the V+ line
- 220-ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial.
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.
Driver IC PCA9685 Length (mm) 62 Width (mm) 25 Height (mm) 15 Weight (gm) 10 SKU: n/a -
-
Uncategorized
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna Rated 4.75 out of 5 based on 12customer ratings (12 customer reviews)
Uncategorized2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna Rated 4.75 out of 5 based on 12customer ratings (12 customer reviews)
Features :
- It uses 2.4GHz global open ISM band, with license-free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
Input Supply voltage (V) 3 ~ 3.6 (recommended 3.3V) Working current in transmit mode (mA) 115 Maximum output power (dBm) +20 Power-down mode current (μA) 4.2 Operating Range (Km) 1 Antenna Gain (peak) (dBi) 2 Receiver sensitivity -92dBm in 2Mbps mode
-95dBm in 1Mbps mode
-104dBm in 250kbps modePA growth (dB) 20 LAN growth (dB) 10 LAN noise figure (dB) 2.6 Operating temperature (°C) -20 ~ +70 Length (mm) 49 Width (mm) 16 Height (mm) 13 Weight (gm) 15 Length of Antenna (cm) 11 SKU: n/a -
BO MOTOR, MOTORS AND DRIVERS
200 RPM Dual Shaft BO Motor – Straight
Features of 200 RPM Dual Shaft BO Motor – Straight:-
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances are often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
SKU: n/a -
CURRENT AND VOLTAGE SENSORS, MISCELLANEOUS SENSORS, SENSOR AND MODULES
20A Range Current Sensor Module ACS712
CURRENT AND VOLTAGE SENSORS, MISCELLANEOUS SENSORS, SENSOR AND MODULES20A Range Current Sensor Module ACS712
- Low-noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5 µs output rise time in response to step input current
- Small footprint, low-profile SOIC8 package
- 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: 20A
- Sensitivity: 100mV/A
Height (mm) 13.5 Weight (gm) 5 SKU: n/a -
ELECTRONIC COMPONENT, RELAY
24V 4-Channel Relay Module (with Light Coupling)
- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: n/a
