Heart Rate click carries Maxim’s MAX30100 integrated pulse oximetry and a heart-rate sensor. It’s an optical sensor that derives its readings from emitting two wavelengths of light from two LEDs – a red and an infrared one – then measuring the absorbance of pulsing blood through a photodetector. This particular LED colour combination is optimized for reading the data through the tip of one’s finger. The signal is processed by a low-noise analog signal processing unit and communicated to the target MCU through the mikroBUS I2C interface. Developers of end-user applications should note that the readings can be negatively impacted by excess motion and changes in temperature. Also, too much pressure can constrict capillary blood flow and therefore diminish the reliability of the data. A programmable INT pin is also available. The operates at the 3.3V power supply. Main Applications: Medical Monitoring Devices Fitness Assistant Devices Wearable Devices
“ADXL335 Module 3-axis Analog Output Accelerometer” has been added to your cart. View cart
SENSOR AND MODULES, TOUCH SENSORS
Super Debug MAX30100 Pulse Heart Rate Sensor Module
- ptical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- high-performance analog front
- Ultra low power operation increases battery life for wearable devices
₹174.00 ₹189.00
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “Super Debug MAX30100 Pulse Heart Rate Sensor Module” Cancel reply
Related products
-
SENSOR AND MODULES
raindrops detection sensor module
0 out of 5(0)Technical Details of Rain drop Sensor Module
- High-quality double-sided FR-04 material
- The comparator output signal is clean. And can source up to 15mA
- Adjustable Sensitivity for DO
- Working voltage 3.3V-5V
- Has a fixed bolt hole, convenient installation
- The output format: “DO” Digital switching outputs ( 0 and 1 ) and Analog voltage output “AO”
- Fixed bolt holes for easy installation
Physical Attributes
- Panel PCB Dimension: Approx.3cm x 1.5cm.
- Soil Probe Dimension: Approx. 5cm x 4cm.
- Cable Length: Approx.21cm.
- Weight (gm): 11
SKU: n/a -
SENSOR AND MODULES
PIR Motion Sensor Detector Module HC-SR501 (Copy)
0 out of 5(0)- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain: <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
- Work temperature: -20-+80°C
-
Model PIR HC-SR501 Operating Voltage (VDC) 4.5 ~ 20 Average Current Consumption (mA) 0.06 Distance Measuring Range (CM) 300 ~ 700 Output Type (High/ Low-level Signal) 3.3V TTL output Dimensions (mm) LxWxH 32 x 24 x 18 Weight (gm) 10 Working Temperature Range (°C) -20 to 80 Detection Angle <140° Delay Time 5 to 200s (Can be Adjusted, Default 5s +/- 3%) Shipping Weight 0.015 kg Shipping Dimensions 4 × 3 × 1 cm
SKU: n/a -
ACCELEROMETER & GYROSCOPE, SENSOR AND MODULES
ADXL345 Tripple Axis Accelerometer Board
0 out of 5(0)Features :
- Ultra-Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
- Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command
- Wide temperature range (−40°C to +85°C).
- 10,000 g shock survival.
- Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop faster than 1117, the faster load speed of response, very suitable for high-noise power supply environment.
- User-selectable resolution
- Fixed 10-bit resolution.
- Full resolution, where resolution increases with G range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all G ranges).
-
Input Supply Voltage (VDC) 3.3 ~ 5 Interface Type I²C, SPI Sensing Range ±2g, ±4g, ±8g, ±16g X-Axis Sensitivity 28.6 LSB/g Y-Axis Sensitivity 31.2 LSB/g Z-Axis Sensitivity 34.5 LSB/g Length (mm) 20.5 Width (mm) 15.5 Height (mm) 3.5 Weight (gm) 0.6
SKU: n/a -
ACCELEROMETER & GYROSCOPE, SENSOR AND MODULES
MPU-6050 3-Axis Accelerometer and Gyro Sensor
0 out of 5(0)Features :
- Chip built-in 16bit AD converter, 16-bit data output.
- I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format.
- Selectable Solder Jumpers on CLK, FSYNC, and AD0.
- Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronization, and gesture detection.
- Embedded algorithms for run-time bias and compass calibration. No user intervention is required.
- Digital-output temperature sensor.
Driver IC MPU-6050 Operating Voltage (VDC) 3 ~ 5 Communication I2C Protocol Gyro range(°/s) ± 250, 500, 1000, 2000 Acceleration range(g) ± 2 ± 4 ± 8 ± 16 Length (mm) 20 Width (mm) 16 SKU: n/a
There are no reviews yet.