Cart

You may be interested in…

• DRONE, FLIGHT CONTROLLER

  KK2.0 Multi-rotor LCD Flight Control Board

  -6%

  DRONE, FLIGHT CONTROLLER

  KK2.0 Multi-rotor LCD Flight Control Board

  0 out of 5

  (0)

  This fligh controller board is a Kk2 kk2. · The multirotar flight controller board uses a firmware version: 1.6 and needs an input voltage: 4.8-6.0V.

  SKU: PH146

  ₹4,699.00 ₹4,999.00

  Add to cart

  Add to wishlist

  Compare
• ARDUINO BOARDS, DEVELOPMENT BOARD

  Arduino Uno R3 DIP with Cable

  -6%

  ARDUINO BOARDS, DEVELOPMENT BOARD

  Arduino Uno R3 DIP with Cable

  0 out of 5

  (0)

  1. Micro-controller : ATmega328.
  2. Operating Voltage : 5V.
  3. Input Voltage (recommended) : 7-12V.
  4. Digital I/O Pins : 14 (of which 6 provide PWM output).
  5. Analog Input Pins : 6.

  Operating Voltage (VDC)	5
  Input Voltage(Recommended)	7-12V
  Input Voltage (limit)	6-20V
  Analog I/O Pins	6
  Digital I/O Pins	14 (of which 6 provide PWM output)
  PWM Digital I/O Pins	6
  DC Current per I/O Pin (mA)	40
  DC Current for 3.3V Pin (mA)	50
  Clock Speed	16 MHz
  SRAM	2
  EEPROM	1 KB (ATmega328)
  Flash Memory	32 KB
  On Board LEDs	On/Off, L (PIN 13), TX, RX
  Dimensions in mm (LxWxH)	75 x 54 x 12
  Weight (gm)	28 (without cable), 54 (with cable)
  Shipping Weight	0.08 kg
  Shipping Dimensions	9 × 6 × 4 cm

  SKU: n/a

  ₹750.00 ₹799.00

  Add to cart

  Add to wishlist

  Compare
• ARDUINO BOARDS, DEVELOPMENT BOARD

  Arduino Mega 2560 Board Without USB Cable

  

  ARDUINO BOARDS, DEVELOPMENT BOARD

  Arduino Mega 2560 Board Without USB Cable

  0 out of 5

  (0)

  The Arduino Mega 2560 is a microcontroller board based on the Atmega 2560 Microcontroller. It is one of the most powerful and feature-rich boards in the Arduino family and is commonly used for projects that require more I/O pins, memory, and processing capabilities than the standard Arduino Uno.

  SKU: PH174

  ₹1,600.00

  Add to cart

  Add to wishlist

  Compare
• ARDUINO BOARDS

  arduino Nano Board R3 With CH340 Chip With Micro USB Cable

  -10%

  ARDUINO BOARDS

  arduino Nano Board R3 With CH340 Chip With Micro USB Cable

  0 out of 5

  (0)

  Technical Details

  • Microcontroller: ATmega328
  • Operating Voltage (VDC): 5
  • Input Voltage (V): 7 to 12
  • Digital I/O Pins: 14
  • Analog I/O Pins: 8
  • DC Current per I/O Pin (mA): 40
  • Flash Memory: 32 KB
  • SRAM: 2
  • EEPROM: 1 KB
  • Clock Speed: 16 MHz

  Physical Attributes

  • PCB Size ( Length × Width ) mm: 43 x 18
  • Weight (gm): 6

  Additional Details

  • 1 pair of TTL level serial transceiver ports RX / TX
  • Using Atmel Atmega328P-AU MCU
  • There is a bootloader installed in it
  • Support USB download and Power
  • Support for external 5V ~ 12V DC power supply
  • It Supports power supply by a 9V battery
  • Support ISP download
  • Automatic reset during program download.
  • Power OK blue LED on the bottom.
  • Green (TX), red (RX), and orange (L) LED.
  • +5V to AREF jumper.
  • Auto-sensing/switching power input.
  • Small mini-B USB for programming and serial monitor.
  • ICSP header for direct program download.
  • Standard 0.1” spacing DIP (breadboard friendly).
  • Manual reset switch.

  SKU: n/a

  ₹359.00 ₹399.00

  Add to cart

  Add to wishlist

  Compare