-
×
Raspberry Pi Pico (Latest & original)
1 × ₹349.00 -
×
Bi-Directional DC Motor Speed Controller Project Using Arduino
1 × ₹4,500.00
Subtotal: ₹4,849.00
Special Offer
Save 34%
-34%
31 in 1 Universal Multifunction Portable Screwdriver Set
₹132.00
Already Sold: 0
Available: 15
-
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%
DRONE, FRAMES AND ACCESSORIESF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: PH148 -
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi 4 Model-B with 8 GB RAM
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port
- Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
SKU: n/a -
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
-5%
INTERFASE CABLES, WIRES AND CABEL30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
- Phone body interface: Micro USB
- Function: Connect to DJI Spark remote control and Micro USB port Smartphones or tablet
- Material: Nylon cable and PVC with high flexibility and stability.
- Cable Length: about 30cm;
- Weight: 9.1g.
- Perfect length for the remote controller with your devices.
SKU: n/a
-
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%DRONE, FRAMES AND ACCESSORIESF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: PH148 -
SENSOR AND MODULES, TEMPERATURE AND HUMIDITY SENSORS
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
-8%
SENSOR AND MODULES, TEMPERATURE AND HUMIDITY SENSORSDS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: n/a -
-
-
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi Pico (Latest & original)
Model : Raspberry Pi PICO
Operating Voltage (VDC) : 1.8 ~ 5.5
Processor : RP2040 (Dual-core Arm Cortex M0+) By Raspberry Pi
Interface : 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channels
RAM : 264 KB
GPIO : 26 Pins
Clock Speed : 133 MHz
On Board Ports : Micro-USB 5V/2.5A DC Power Input Port
Operating Temperature (°C) :-20 to 85SKU: PH032 -
ARDUINO BOARDS
arduino Nano Board R3 With CH340 Chip With Micro USB Cable
Technical Details
- Microcontroller: ATmega328
- Operating Voltage (VDC): 5
- Input Voltage (V): 7 to 12
- Digital I/O Pins: 14
- Analog I/O Pins: 8
- DC Current per I/O Pin (mA): 40
- Flash Memory: 32 KB
- SRAM: 2
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Physical Attributes
- PCB Size ( Length × Width ) mm: 43 x 18
- Weight (gm): 6
Additional Details
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- It Supports power supply by a 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX), and orange (L) LED.
- +5V to AREF jumper.
- Auto-sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a
-
BO MOTOR, MOTORS AND DRIVERS
200 RPM Dual Shaft BO Motor – Straight
Features of 200 RPM Dual Shaft BO Motor – Straight:-
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances are often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
SKU: n/a -
MOTOR DRIVER, MOTORS AND DRIVERS
L298N 2A Based Motor Driver Module
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip: L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
Driver Model L298N 2A Operating Voltage (VDC) 5 ~ 35 Peak Current (A) 2 Continuous Current (A) 0-36mA No. of Channels 2 Over-Current Protection (A) Yes Thermal Protection Yes LED Indicator Yes Cooling Fan No Arduino Sheild No- can be used with Wire connection Dimensions in mm (LxWxH) 44 x 44 x 28 Weight (gm) 25 Max power  25W. Shipping Weight 0.03 kg Shipping Dimensions 7 × 7 × 3 cm SKU: n/a -
-
ARDUINO, MINI PROJECT, PROJECTS AND KIT, SENSOR BASED
Automated Curtain Control Systema with Rain Sensor
-17%
ARDUINO, MINI PROJECT, PROJECTS AND KIT, SENSOR BASEDAutomated Curtain Control Systema with Rain Sensor
Transform your home with an automated curtain controller using a rain sensor. This DIY project opens and closes the curtain automatically when it starts and stops raining, providing convenience and weather protection. Learn how to create your own smart home solution with Arduino.
SKU: EHEE020 -
Uncategorized
DS18B20 Temperature Sensor Module
- Digital signal output
- 18B20 Temperature Sensor Chip
- Resolution adjustment ranges from 9-12 bytes.
- Send data via a pin
- Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.
Operating supply voltage 3 to 5.5 volts Digital output Resolution 9 to 12 bits Temperature measurement ranges -55°C to +125°C, ( accurate to 0.5°C.) Maximum conversion time and response 750 ms Length (mm) 19 Width (mm) 15 Height (mm) 6 Weight (gm) 9 Shipping Weight 0.014 kg Shipping Dimensions 5 × 3 × 1 cm SKU: n/a
Products Grid
-
ELECTRICAL PROJECTS, PROJECTS AND KIT
Bi-Directional DC Motor Speed Controller Project Using Arduino
-10%ELECTRICAL PROJECTS, PROJECTS AND KITBi-Directional DC Motor Speed Controller Project Using Arduino
This project is about creating a DC Motor Speed Controller using Arduino, you will see how to control the speed and direction of a DC motor using an Arduino, potentiometer, push buttons, and an L298N motor driver.
SKU: n/a -
-
PROJECTS AND KIT, ROBITCS PROJECT
Wired control Tank With Robotic Arm || Robotics Project
This college-level project combines a tracked tank chassis with a robotic arm, all controlled via a wired interface. It’s designed for students to learn about robotics, control systems, and mechanical design.
SKU: EHRB007
Best Sellers
Recently Added
ELECTRICAL PROJECTS, PROJECTS AND KIT
Bi-Directional DC Motor Speed Controller Project Using Arduino
-10%
ELECTRICAL PROJECTS, PROJECTS AND KIT
Bi-Directional DC Motor Speed Controller Project Using Arduino
This project is about creating a DC Motor Speed Controller using Arduino, you will see how to control the speed and direction of a DC motor using an Arduino, potentiometer, push buttons, and an L298N motor driver.
SKU: n/a
PROJECTS AND KIT, ROBITCS PROJECT
Wired control Tank With Robotic Arm || Robotics Project
This college-level project combines a tracked tank chassis with a robotic arm, all controlled via a wired interface. It’s designed for students to learn about robotics, control systems, and mechanical design.
SKU: EHRB007
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASED
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
-10%
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASED
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
“Alcohol Detection Vehicle System prevents drunk driving with real-time alcohol sensing, location tracking, motor lock, and SMS alerts for enhanced road safety and control.”
SKU: EHAP049
GAS SENSORS, SENSOR AND MODULES
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
The MQ6 Gas Sensor is a type of gas detection device that is designed to detect specific gases in the air, particularly Liquefied Petroleum Gas (LPG), Isobutane, and Propane. These gases are commonly used in household appliances like stoves, heaters, and gas-powered vehicles. The MQ-6 sensor module is part of the MQ series of gas sensors produced by the company Winsen, and it operates based on the principle of chemical resistance change.
SKU: PH213
GAS SENSORS, SENSOR AND MODULES
MQ-3 Alcohol Detector Gas Sensor Module
The MQ-3 Alcohol Detector Gas Sensor Module is a widely used sensor in various applications for detecting alcohol vapors.
Operating Voltage (VDC): 5V ±0.1
Current Consumption: 150mA
Operation Temperature : -10°C ~ +70°C
Concentration : 0.05 mg/L ~ 10 mg/L Alcohol
Load resistance: 200 kΩ
SKU: PH212
GAS SENSORS, SENSOR AND MODULES
MQ-4 High Sensitive to Methane and Natural Gas
The MQ-4 High Sensitivity Gas Sensor Module is widely used to detect various gases, particularly methane (CH4) and natural gas.
Model: MQ-4
IC Chip: LM393
Operating Voltage (VDC) : 3 ~ 5
Detecting Range: 300ppm to 10000ppm
SKU: PH211
GAS SENSORS, SENSOR AND MODULES
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
The MQ-7 CO Carbon Monoxide Coal Gas Sensor Module is a widely used sensor for detecting carbon monoxide (CO) gas, particularly in environments where this toxic gas might be present.
Model: MQ-7
Operating voltage (v): DC 5
Range: 10 ~ 1000 ppm
SKU: PH210
GAS SENSORS, SENSOR AND MODULES
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
The MQ-9 Carbon Monoxide, Methane, and LPG Gas Sensor Module is a versatile sensor designed to detect the presence of carbon monoxide (CO), methane (CH4), and liquefied petroleum gas (LPG).
Model: MQ-9
Current Consumption (mA): 150
Operating Voltage (VDC): 5
Do output: TTL digital 0 and 1 (0.1 and 5V)
Ao output: 0.1-0.3V (relatively clean)
SKU: PH209
GAS SENSORS, SENSOR AND MODULES
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
The MQ-5 Methane LPG Liquid Propane Gas Sensor Module is a widely used sensor for detecting methane and LPG (liquefied petroleum gas) vapors.
Model: MQ-5
Operating Voltage (VDC): 5
Operating Temperature (°C): -20 to 40
SKU: PH208
GAS SENSORS, SENSOR AND MODULES
MQ-2 Smoke LPG Butane Hydrogen Gas Sensor Detector Module
The MQ 2 Smoke Detection Sensor/MQ2 Gas Sensor is a popular gas detection module used in various electronics projects and applications.
Operating Voltage (VDC): 5
Analog Output Voltage: 0V to 5V
Digital Output Voltage : 0V or 5V (TTL Logic)
SKU: PH207
GAS SENSORS, SENSOR AND MODULES
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
The MQ-8 Hydrogen Gas Sensor Module is a device designed to detect the presence of hydrogen gas in the environment.
Model: MQ-8
Operating Voltage (VDC): 5
Current Consumption(mA) : 150
Do output: TTL digital 0 and 1 ( 0.1 and 5V)
Ao output: 0.1-0 .3 V (Relative to Pollution )
SKU: PH206
GAS SENSORS, SENSOR AND MODULES
MQ 135 Air Quality/Gas Detector Sensor Module For Arduino
The MQ-135 Air Quality/Gas Detector Sensor Module is a widely used sensor module designed to detect a range of air pollutants and gases.
Model: MQ-135
Operating Voltage (VDC): 5
Detecting Range: 100ppm to 1000ppm
SKU: PH205