-
×
I2C Module for 16x2 (1602) Character LCD
1 × ₹84.00
Subtotal: ₹84.00
Special Offer
Save 17%
-17%
Automated Curtain Control Systema with Rain Sensor
₹2,499.00
Already Sold: 0
Available: 15
-
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%
DRONE, FRAMES AND ACCESSORIESF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: PH148 -
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi 4 Model-B with 8 GB RAM
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port
- Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
SKU: n/a -
INTERFASE CABLES, WIRES AND CABEL
30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
-5%
INTERFASE CABLES, WIRES AND CABEL30cm Micro USB To Micro USB Connector For Dji Mavic Pro & Spark Remote Controller for Android Smart Phone
- Phone body interface: Micro USB
- Function: Connect to DJI Spark remote control and Micro USB port Smartphones or tablet
- Material: Nylon cable and PVC with high flexibility and stability.
- Cable Length: about 30cm;
- Weight: 9.1g.
- Perfect length for the remote controller with your devices.
SKU: n/a
-
DRONE, FRAMES AND ACCESSORIES
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
-11%DRONE, FRAMES AND ACCESSORIESF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: PH148 -
SENSOR AND MODULES, TEMPERATURE AND HUMIDITY SENSORS
DS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
-8%
SENSOR AND MODULES, TEMPERATURE AND HUMIDITY SENSORSDS18B20 Water Proof Temperature Probe – Black (1m) Original Chip
- A probe by new original installation import DS18B20 temperature sensor chip.
- Stainless steel tube encapsulation waterproof moistureproof prevents rust.
- Stainless steel shell (6 * 45 mm), lead length 100 mm (shielding wire) use stability;
- 3.0 V-5.5 V power supply;
- Temperature range wide: -55 ℃ ~ + 125 ℃;
- Without the external components, the unique single bus.
SKU: n/a -
-
-
DEVELOPMENT BOARD, RASBERRY PI
Raspberry Pi Pico (Latest & original)
Model : Raspberry Pi PICO
Operating Voltage (VDC) : 1.8 ~ 5.5
Processor : RP2040 (Dual-core Arm Cortex M0+) By Raspberry Pi
Interface : 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channels
RAM : 264 KB
GPIO : 26 Pins
Clock Speed : 133 MHz
On Board Ports : Micro-USB 5V/2.5A DC Power Input Port
Operating Temperature (°C) :-20 to 85SKU: PH032 -
ARDUINO BOARDS
arduino Nano Board R3 With CH340 Chip With Micro USB Cable
Technical Details
- Microcontroller: ATmega328
- Operating Voltage (VDC): 5
- Input Voltage (V): 7 to 12
- Digital I/O Pins: 14
- Analog I/O Pins: 8
- DC Current per I/O Pin (mA): 40
- Flash Memory: 32 KB
- SRAM: 2
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Physical Attributes
- PCB Size ( Length × Width ) mm: 43 x 18
- Weight (gm): 6
Additional Details
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- It Supports power supply by a 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX), and orange (L) LED.
- +5V to AREF jumper.
- Auto-sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a
-
DISPLAY AND LCD, LED Display
MAX7219 Dot Led Matrix Module MCU Control LED Display Module
- Driver Chip: MAX7219
- Input Voltage: 3.7 to 5.3 V
- Input Current: 320 mA
- Display Dimensions: 32x32x6 (LxWxH) mm
- PCD Dimensions: 50×32 (LxW) mm
Driver IC
MAX7219
Input Voltage (V)
5
Max. Operating Current (mA)
320
LED Color
Red
Length (mm)
32
Width (mm)
32
Height (mm)
6
PCB Size ( L x W ) mm
50 x 32
Weight (gm)
20
Shipping Weight0.022 kgShipping Dimensions7 × 5 × 3 cm
SKU: n/a -
-
MINI PROJECT, PROJECTS AND KIT, SENSOR BASED
Guardian Alert: Fire Alarm System with LM358 Precision
-13%
MINI PROJECT, PROJECTS AND KIT, SENSOR BASEDGuardian Alert: Fire Alarm System with LM358 Precision
Introducing our state-of-the-art Fire Alarm System, meticulously crafted with the precision of the LM358 IC. Designed to safeguard your space, this advanced alarm system detects the earliest signs of fire, ensuring a swift and reliable response.
SKU: EHEE010 -
-
-
GAS SENSORS, SENSOR AND MODULES
MQ-8 Hydrogen Gas Sensor Module H2 Alarm Detection
The MQ-8 Hydrogen Gas Sensor Module is a device designed to detect the presence of hydrogen gas in the environment.
- Model: MQ-8
- Operating Voltage (VDC): 5
- Current Consumption(mA) : 150
- Do output: TTL digital 0 and 1 ( 0.1 and 5V)
- Ao output: 0.1-0 .3 V (Relative to Pollution )
SKU: PH206 -
ELECTRONIC COMPONENT, RELAY
24V 4-Channel Relay Module (with Light Coupling)
- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: n/a -
CHARACTER LCD, DEVELOPMENT BOARD, DISPLAY AND LCD, OLED DISPLAY, SENSOR AND MODULES
I2C Module for 16×2 (1602) Character LCD
CHARACTER LCD, DEVELOPMENT BOARD, DISPLAY AND LCD, OLED DISPLAY, SENSOR AND MODULESI2C Module for 16×2 (1602) Character LCD
Features:-
- Operating Voltage: 5V
- Backlight and Contrast is adjusted by potentiometer
- Serial I2C control of LCD display using PCF8574
- Come with 2 IIC interface, which can be connected by Dupont Line or IIC dedicated cable
- Compatible for 16×2 LCD
- This is another great IIC/I2C/TWI/SPI Serial Interface
- With this I2C interface module, you will be able to realize data display via only 2 wires.
SKU: n/a
Products Grid
-
ELECTRICAL PROJECTS, PROJECTS AND KITBi-Directional DC Motor Speed Controller Project Using Arduino
This project is about creating a DC Motor Speed Controller using Arduino, you will see how to control the speed and direction of a DC motor using an Arduino, potentiometer, push buttons, and an L298N motor driver.
SKU: n/a
-
-
PROJECTS AND KIT, ROBITCS PROJECT
Wired control Tank With Robotic Arm || Robotics Project
This college-level project combines a tracked tank chassis with a robotic arm, all controlled via a wired interface. It’s designed for students to learn about robotics, control systems, and mechanical design.
SKU: EHRB007 -
Best Sellers
Recently Added
ELECTRICAL PROJECTS, PROJECTS AND KIT
Bi-Directional DC Motor Speed Controller Project Using Arduino
-10%
ELECTRICAL PROJECTS, PROJECTS AND KIT
Bi-Directional DC Motor Speed Controller Project Using Arduino
This project is about creating a DC Motor Speed Controller using Arduino, you will see how to control the speed and direction of a DC motor using an Arduino, potentiometer, push buttons, and an L298N motor driver.
SKU: n/a
PROJECTS AND KIT, ROBITCS PROJECT
Wired control Tank With Robotic Arm || Robotics Project
This college-level project combines a tracked tank chassis with a robotic arm, all controlled via a wired interface. It’s designed for students to learn about robotics, control systems, and mechanical design.
SKU: EHRB007
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASED
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
-10%
ARDUINO, IOT, PROJECTS AND KIT, SENSOR BASED
Alcohol Detection and Vehicle Control System with GPS Tracking and Motor Lock for Drunk Driving Prevention
“Alcohol Detection Vehicle System prevents drunk driving with real-time alcohol sensing, location tracking, motor lock, and SMS alerts for enhanced road safety and control.”
SKU: EHAP049
GAS SENSORS, SENSOR AND MODULES
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
The MQ6 Gas Sensor is a type of gas detection device that is designed to detect specific gases in the air, particularly Liquefied Petroleum Gas (LPG), Isobutane, and Propane. These gases are commonly used in household appliances like stoves, heaters, and gas-powered vehicles. The MQ-6 sensor module is part of the MQ series of gas sensors produced by the company Winsen, and it operates based on the principle of chemical resistance change.
SKU: PH213
GAS SENSORS, SENSOR AND MODULES
MQ-3 Alcohol Detector Gas Sensor Module
The MQ-3 Alcohol Detector Gas Sensor Module is a widely used sensor in various applications for detecting alcohol vapors.
Operating Voltage (VDC): 5V ±0.1
Current Consumption: 150mA
Operation Temperature : -10°C ~ +70°C
Concentration : 0.05 mg/L ~ 10 mg/L Alcohol
Load resistance: 200 kΩ
SKU: PH212
GAS SENSORS, SENSOR AND MODULES
MQ-4 High Sensitive to Methane and Natural Gas
The MQ-4 High Sensitivity Gas Sensor Module is widely used to detect various gases, particularly methane (CH4) and natural gas.
Model: MQ-4
IC Chip: LM393
Operating Voltage (VDC) : 3 ~ 5
Detecting Range: 300ppm to 10000ppm
SKU: PH211
GAS SENSORS, SENSOR AND MODULES
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
The MQ-7 CO Carbon Monoxide Coal Gas Sensor Module is a widely used sensor for detecting carbon monoxide (CO) gas, particularly in environments where this toxic gas might be present.
Model: MQ-7
Operating voltage (v): DC 5
Range: 10 ~ 1000 ppm
SKU: PH210
GAS SENSORS, SENSOR AND MODULES
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
The MQ-9 Carbon Monoxide, Methane, and LPG Gas Sensor Module is a versatile sensor designed to detect the presence of carbon monoxide (CO), methane (CH4), and liquefied petroleum gas (LPG).
Model: MQ-9
Current Consumption (mA): 150
Operating Voltage (VDC): 5
Do output: TTL digital 0 and 1 (0.1 and 5V)
Ao output: 0.1-0.3V (relatively clean)
SKU: PH209